
New TopShim run:

version = topshim 2.4.0
date = 2026-11-09
time = 22:52:58.679
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  1: FWHM Before=10.5 Hz, Target= 0.4 Hz, After= 0.5 Hz
Iteration  2: FWHM Before= 0.5 Hz, Target= 0.4 Hz, After= 0.3 Hz
Iteration  3: FWHM Before= 0.3 Hz, Target= 0.5 Hz, After= 0.3 Hz
Iteration  4: FWHM Before= 0.3 Hz, Target= 0.8 Hz, After= 0.6 Hz
Iteration  5: FWHM Before= 0.6 Hz, Target= 0.8 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 0.851

shim changes: 
Z	-2051
Z2	-3473
Z3	-7707
Z4	-11136

duration = 7 min 45 sec
completed successfully
finished Mon Nov 09 23:00:42 2026


========================================================================
