
New TopShim run:

version = topshim 2.4.0
date = 2026-11-09
time = 16:02:01.950
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  1: FWHM Before= 2.5 Hz, Target= 0.3 Hz, After= 0.8 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  2: FWHM Before= 0.8 Hz, Target= 0.4 Hz, After= 0.5 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  3: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 1.0 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  4: FWHM Before= 1.0 Hz, Target= 0.2 Hz, After= 0.5 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  5: FWHM Before= 0.5 Hz, Target= 0.4 Hz, After= 0.5 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 0.757

shim changes: 
Z	+183
Z2	+139
Z3	+177
Z4	+917

duration = 10 min 2 sec
completed successfully
finished Mon Nov 09 16:12:02 2026


========================================================================
