
New TopShim run:

version = topshim 2.4.0
date = 2026-11-06
time = 22:25:42.336
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  1: FWHM Before= 0.9 Hz, Target= 0.9 Hz, After= 1.3 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  2: FWHM Before= 1.3 Hz, Target= 0.8 Hz, After= 1.4 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  3: FWHM Before= 1.4 Hz, Target= 1.6 Hz, After= 1.9 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  4: FWHM Before= 1.9 Hz, Target= 1.1 Hz, After= 1.0 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 1.38

shim changes: 
Z	+66
Z2	+121
Z3	+151
Z4	+64

duration = 8 min 30 sec
completed successfully
finished Fri Nov 06 22:34:11 2026


========================================================================
