
New TopShim run:

version = topshim 2.4.0
date = 2026-11-05
time = 02:20:22.244
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Iteration  1: FWHM Before= 0.2 Hz, Target= 0.3 Hz, After= 0.3 Hz
Iteration  2: FWHM Before= 0.3 Hz, Target= 0.3 Hz, After= 7.8 Hz
Iteration  3: FWHM Before= 7.8 Hz, Target= 0.3 Hz, After= 8.9 Hz
Iteration  4: FWHM Before= 8.9 Hz, Target= 0.2 Hz, After= 0.2 Hz
Diverging behaviour detected. Shimming was aborted.
Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 8.17

shim changes: 
Z	+7137
Z2	+12000
Z3	+20894
Z4	+23242

duration = 4 min 36 sec
completed successfully
finished Thu Nov 05 02:24:56 2026


========================================================================
