
New TopShim run:

version = topshim 2.4.0
date = 2026-11-10
time = 14:53:16.652
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  1: FWHM Before= 0.6 Hz, Target= 0.6 Hz, After= 1.2 Hz
Required SINO has not been achieved!
Please increase DURMAX if a better map quality is needed.
Iteration  2: FWHM Before= 1.2 Hz, Target= 0.8 Hz, After= 0.3 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 0.802

shim changes: 
Z	-14
Z2	+37
Z3	+22
Z4	+148

duration = 5 min 26 sec
completed successfully
finished Tue Nov 10 14:58:41 2026


========================================================================
