
New TopShim run:

version = topshim 2.4.0
date = 2026-11-10
time = 13:28:14.633
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
echo time must be reduced
Iteration  1: FWHM Before=80.2 Hz, Target= 0.3 Hz, After= 0.4 Hz
Iteration  2: FWHM Before= 0.4 Hz, Target= 0.3 Hz, After= 1.4 Hz
Iteration  3: FWHM Before= 1.4 Hz, Target= 0.7 Hz, After= 0.7 Hz
Iteration  4: FWHM Before= 0.7 Hz, Target= 1.4 Hz, After= 2.1 Hz
Iteration  5: FWHM Before= 2.1 Hz, Target= 2.5 Hz, After= 2.2 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 2

shim changes: 
Z	-2268
Z2	-4139
Z3	-11485
Z4	-18378

duration = 4 min 44 sec
completed successfully
finished Tue Nov 10 13:32:57 2026


========================================================================
