
New TopShim run:

version = topshim 2.4.0
date = 2026-10-26
time = 10:34:22.567
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
echo time must be reduced
Iteration  1: FWHM Before=10.1 Hz, Target= 7.1 Hz, After= 0.3 Hz
Iteration  2: FWHM Before= 0.3 Hz, Target= 3.5 Hz, After= 9.6 Hz
Iteration  3: FWHM Before= 9.6 Hz, Target= 2.1 Hz, After= 7.7 Hz
Iteration  4: FWHM Before= 7.7 Hz, Target= 1.9 Hz, After= 2.2 Hz
Iteration  5: FWHM Before= 2.2 Hz, Target= 1.8 Hz, After= 2.0 Hz
Iteration  6: FWHM Before= 2.0 Hz, Target= 0.4 Hz, After= 3.3 Hz
Iteration  7: FWHM Before= 3.3 Hz, Target= 0.4 Hz, After= 0.9 Hz
Iteration  8: FWHM Before= 0.9 Hz, Target= 0.7 Hz, After= 0.8 Hz
Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 1.51

shim changes: 
Z	+121
Z2	+2774
Z3	-9489
Z4	-90837

duration = 15 min 29 sec
completed successfully
finished Mon Oct 26 10:49:50 2026


========================================================================
