
New TopShim run:

version = topshim 2.4.0
date = 2026-10-27
time = 16:14:37.360
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Iteration  1: FWHM Before= 0.3 Hz, Target= 2.9 Hz, After= 0.5 Hz
Iteration  2: FWHM Before= 0.5 Hz, Target= 1.5 Hz, After= 0.2 Hz
Iteration  3: FWHM Before= 0.2 Hz, Target= 0.2 Hz, After= 3.0 Hz
Iteration  4: FWHM Before= 3.0 Hz, Target= 0.2 Hz, After= 0.3 Hz
Iteration  5: FWHM Before= 0.3 Hz, Target= 0.2 Hz, After= 0.5 Hz
Iteration  6: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration  7: FWHM Before= 0.5 Hz, Target= 0.3 Hz, After= 0.5 Hz
Iteration  8: FWHM Before= 0.5 Hz, Target= 0.3 Hz, After= 0.5 Hz
Iteration  9: FWHM Before= 0.5 Hz, Target= 0.6 Hz, After= 0.6 Hz
Iteration 10: FWHM Before= 0.6 Hz, Target= 0.6 Hz, After= 0.5 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 0.778

shim changes: 
Z	+3756
Z2	+7005
Z3	+14921
Z4	+21532

duration = 3 min 44 sec
completed successfully
finished Tue Oct 27 16:18:20 2026


========================================================================
