
New TopShim run:

version = topshim 2.4.0
date = 2026-10-03
time = 00:05:01.928
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Iteration  1: FWHM Before=20.0 Hz, Target= 0.3 Hz, After= 0.8 Hz
Iteration  2: FWHM Before= 0.8 Hz, Target= 0.3 Hz, After= 0.3 Hz
Iteration  3: FWHM Before= 0.3 Hz, Target= 0.2 Hz, After= 0.3 Hz
Iteration  4: FWHM Before= 0.3 Hz, Target= 0.3 Hz, After= 0.4 Hz
Iteration  5: FWHM Before= 0.4 Hz, Target= 0.4 Hz, After= 0.4 Hz
Iteration  6: FWHM Before= 0.4 Hz, Target= 0.2 Hz, After= 0.4 Hz
Iteration  7: FWHM Before= 0.4 Hz, Target= 0.4 Hz, After= 0.6 Hz
Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 0.452

shim changes: 
Z	+277
Z2	+175
Z3	+102
Z4	-111

duration = 4 min 37 sec
completed successfully
finished Sat Oct 03 00:09:37 2026


========================================================================
