
New TopShim run:

version = topshim 2.4.0
date = 2026-10-01
time = 19:12:22.604
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Iteration  1: FWHM Before= 1.0 Hz, Target= 0.7 Hz, After= 0.7 Hz
Iteration  2: FWHM Before= 0.7 Hz, Target= 0.7 Hz, After= 0.9 Hz
Iteration  3: FWHM Before= 0.9 Hz, Target= 0.4 Hz, After= 1.2 Hz
Iteration  4: FWHM Before= 1.2 Hz, Target= 0.8 Hz, After= 1.0 Hz
Iteration  5: FWHM Before= 1.0 Hz, Target= 0.8 Hz, After= 0.7 Hz
Iteration  6: FWHM Before= 0.7 Hz, Target= 0.7 Hz, After= 1.1 Hz
Iteration  7: FWHM Before= 1.1 Hz, Target= 0.9 Hz, After= 0.9 Hz
Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 1.04

shim changes: 
Z	+23
Z2	+171
Z3	+5
Z4	-2508

duration = 6 min 18 sec
completed successfully
finished Thu Oct 01 19:18:40 2026


========================================================================
